Manufacturer and Expert In Laboratory Furniture, Lab
Furniture,
Fume Hoods
Eye wash &
safety Shower
Enclosed Safety
Shower
Provides full-body shower and eye
wash while protecting lab against
water and chemical splashes
Polypropylene enclosure resists most
lab acids and corrosives
Easy-parting transparent vinyl
curtain allows fast, convenient
access while shielding the external
environment
Immediate-response operation handles
are easy to activate
Pass-Through design available to
accommodate multiple facilities
ULTRA FABssafety shower
combines easy, reliable operation
with a fully enclosed design that
enhances safety both inside and
outside the shower area.
The
polypropylene shell resists most
laboratory acids and corrosives. By
shielding the shower on three sides,
it minimizes the chance of the water
spray—or of harmful chemical
splashes—affecting parts or
personnel outside the shower. The
vinyl strip curtain on the front is
easily parted for quick entry into
the enclosure. This design
eliminates the tricky task of
fumbling with a door latch in an
emergency situation. The
pass-through design, which includes
parting curtains on opposing sides,
can be installed in a wall or
hallway connecting two labs to allow
fast, easy access from either
facility.
All eye rinser
hardware is zinc-plated. The
standard overhead nozzle height is
78" off the shower floor; the eye
rinsers are positioned 42" off the
floor. The shower comes complete
with PVC plumbing that connects to
your in-house water supply by means
of a 1.25" ID pipe fitting. The
sloping bottom feeds into a 2.5"
drain line.
Specification
Dimensions:
38"W x 41"D x 90"H
Construction Outer Shell:
Welded
0.5" polypropylene shell
with 40 mil transparent
vinyl strip curtain on front
(8"-wide strips with 2"
overlap)
Nozzles:
10"-diameter ABS plastic
overhead nozzle
(5.75"-diameter flow
pattern) with 304 stainless
steel pull handle;
zinc-plated eye rinsers (8"
center to center in
12"-diameter bowl) mounted
42" off floor, with
zinc-plated push handle
Plumbing:
1.25"
polypropylene pipe (supply
line); 2.5" polypropylene
drain line
Installation:
Requires 1.25" ID (male)
water feed line connection
and 2.5" ID (male) drain
line connection
